Mirror Installation & Maintenance

Security Mirror Installation

Indoor/Outdoor Convex Mirrors

Round Convex Security Mirror

Shatterproof acrylic round and rectangular convex mirrors for increased safety and security in retail stores, warehouses, offices, the home and more. Security mirrors help to eliminate blind spots and increase aisle visibility or visibility around corners. Round and rectangular acrylic safety mirrors available in multiple diameters. Convex mirrors allow for 160 degrees of vision. Each comes complete with adjustable hardware for hanging.

360 Degree Acrylic Dome Mirrors

360 Degree Dome Security Mirrors

Each Full Dome 360 degree safety/security mirror comes with a chain kit for easy installation (3 lengths of chain and 4 “S” Hooks). For higher ceilings use addition length of chain or heavy wire to drop your mirror to the desired height. The Dome 360 Mirror can also be fastened directly to the wall or ceiling with your fasteners. For best viewing recommended height for the mirror is 8-10 feet from the ground.

180 Degree Acrylic Dome Mirrors

180 degree dome security mirror

The Half Dome 180 degree safety/security mirror comes with 1½” long wood screws for attachment to the wall or ceiling. There are holes drilled in the flange of the mirror for the screws to go through for installation. If you are attaching the mirror to surfaces such as concrete, block, steel, etc…you will need to provide your own fasteners.

90 Degree Acrylic Dome Mirrors

90 degree dome mirror

The Quarter Dome 90 degree safety/security mirror comes with 1 ½” long wood screw for attachment to the ceiling. The mirror is normally attached to the ceiling where the 2 walls meet in the corner. There are holes drilled in the flange of the mirror for the screws to go through for installation. If you are attaching the mirror to surfaces such as concrete, block, steel, etc…you will need to provide your own fasteners.

Security Mirror Maintenance

How to clean and care for your acrylic mirror:

Acrylic is a soft material and if not handled properly can scratch.
Cleaning: For cleaning your acrylic mirror, use a mild detergent or soap using a clean, dry, soft dry cloth.

To avoid leaving scratches on the acrylic, it is recommended not to aggressively wipe the mirror, or to clean too often.

  • Polishing:
    Apply a thin coat of spray wax to the acrylic mirror lens. With a dry, soft cloth gently wipe the mirror clean. The wax will help polish the acrylic mirror and fill in small scratches.
  • Tar, Paint or Grease removal:
    Using a soft cloth, apply a light amount of kerosene or naptha. To avoid leaving scratches, it is recommended not to aggressively wipe the mirror.
  • Never use:
    Glass cleaners, gasoline, acetone or household cleaners on Superior Mirror security mirrors.

The above suggestions are merely reliable methods of cleaning.
We are not responsible for any damage done to the mirror due to cleaning or polishing.